Using the MicroSync™ with MicroSync™ camera firing cords allows you to remotely and wirelessly operate the shutter of your camera just as if you were using a traditional remote camera firing cord. There are four important things to know about using the MicroSync™ and MicroSync™ camera firing cords to fire your SLR:
-
With your camera or lens in the auto focus mode, depressing the fire button on the MicroSync™ transmitter will first focus your camera and then fire it.
-
In the continuous shooting mode, you can press and hold down the fire button on the MicroSync™ transmitter, which will allow your camera to fire as fast as your camera is capable of firing.
-
To prevent your digital SLR from going to sleep, you will need to disable your camera’s auto power-off function. Canon users set your “Auto Power Off” function to off.
-
In bulb mode, you can press and hold down the fire button on the MicroSync™ transmitter for any length of time, then release the fire button to end the exposure (subject to your camera’s limitations).
Cable Release Cord for Canon Pro SLRs, Model VMC115
Fire your Canon pro SLR wirelessly and remotely from up to 100 feet away using the MicroSync™ Digital Kit.
Works with Canon D2000, D30, D60, 10D, 20D, 30D, 40D, 1D, 1Ds, 1D Mark II, 1Ds Mark II, 1D Mark II N, 1D Mark III, 1Ds Mark III, 5D, 1V, 1VHS and EOS 3 SLRs.
Note: This cord is not compatible with all Canon SLRs.
- Length: 22" long
- How to use: Connect the sub-mini phone end of this cord to the MicroSync™ Receiver. Connect the 3-pin end of this cord to the Canon SLR's electronic cable release input.
Cable Release Cord for Nikon SLRs, Model VMC116
Fire your Nikon SLR wirelessly and remotely from up to 100 feet away using the MicroSync™ Digital Kit.
Works with Nikon D1, D1X, D2X, D1H, D2H, D2Hs, D3, D100 with MBD100 grip, D200, D200, D300, F100, F5, F6, N90 and N90s SLRs.
Note: This cord is not compatible with all Nikon SLRs.
- Length: 22" long
- How to use: Connect the sub-mini phone end of this cord to the MicroSync™ Receiver. Connect the 10-pin end of this cord to the Nikon SLR's electronic cable release input.
Cable Release Cord for Canon Digital Rebel/XT SLRs, Model VMC117
Cable Release Cord for Pentax and Canon Digital Rebel/XT SLRs, Model VMC117
Fire your Pentax or Canon Digital Rebel/XT SLR wirelessly and remotely from up to 100 feet away using the MicroSync™ Digital Kit. .
Works with Canon Digital Rebel (300D), XT (350D), XTi (400D), XSI (450D), EOS Rebel 2000, GII, G, T2, Ti, XS, XSN SLRs, Elan 7, 7e, 7n, 7ne, II, IIe SLRs and Pentax *istD, *istDL, *istDS, *istDS2, K20D, K100, K100D Super, K200D, and XZ-L SLRs.
Note: This cord is not compatible with all Canon and Pentax SLRs.
- Length: 22" long
- How to use: Connect the MONO sub-mini phone end of this cord to the MicroSync™ Receiver. Connect the STEREO sub-mini phone end of this cord to the Pentax or Canon SLR's electronic cable release input. Please note that the STEREO end has two black insulating rings on the sub-mini phone plug.
|
|
